Catatan Harianku

1. Download this tool Epson R230 Adjustment , ekstract winrar to your PC and run it. 2. Before you select accept, Change the settings on your computer time prior to the date of 13 January 2006. 3. If time on the pc you've changed, run the application above, and select accept, and will appear beside the display. 4. Select Mode Name, Match your printer will reset , so also just USB Port Selection Select 001 (Stylus Photo R230), and lastly select Destinations La tin / Usa, or Asia, it's up to you. 5. Appears it will be the next display and select Maintenance, check the waste ink pad counter button, continue to select the reset, if it already appears succesful. 6.Turn Off a few minutes,and then turn On again

1. When the counter nearly full,an orange light blinks on the RESUME button 8 times. Switch to green power button one time,press a RESUME button. The printer are working then.But if the counter is full a light on the power and Resume will flash alternately. It will show "error number : 5B00" on the screen. 2. Connected POWER and USB line before the reset. 3. Download this tool or visit www.compute.co.th 4. After downloading,you will get a file "ip2770.doc" but you have to change the file name extension from ".doc" to ".exe" 5. Double clicks on file ip2770.exe 6. Notice at the usb port,it must be the same number as a printer's driver. You can check it by go to Control Panel --->Printers and Faxes ----> Canon IP2770 then right click and choose printer properties then choose Port as the picture After checking the same port. Then go to services mode and follow the steps Turn of without pull the AC power line out,wait until a printer...

1.Connected POWER and USB before reset processing 2.Download this tool or visit www.compute.co.th 3.After download is completed.You have to change a file name extension from ".doc" to ".exe" 4.Turn of the printer,wait until it stop working. 5.Press the STOP/RESET button,then press the POWER button and hold more seconds, 6.After that press the STOP/RESET button twice still press hold POWER button. 7.There after leave out from both of buttons to approach SERVICE MODE 8.Double click on the file MP258.EXE 9.It will looks like the picture,after that insert of piece of paper & press the MAIN button once,wait until printing out of paper. 10.Press an EEPROM CLEAR button to CLEAR EEPROM,after that one more paper and press an EEPROM button,then printer will be printed EEPROM to 11.When the process was completed,turn it off and turn on again. taken from www.compute.co.th

Procedure to reset Printer canon MP145 and Canon MP160 with Error Code Message for Printer Canon MP145 and Canon MP160, you can find error code message the end of this post: 1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button. 2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button. 3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection) 4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)note: press 4 times for waste ink counter reset. The number of the Reset button pressing LED Function Remarks 0 time Green Power off 1 time Orange Service p...

Simple way to reset Canon IP 1880 & IP 1980,just following these steps: 1. Press Resume button ( hold for 1 - 2 minutes ). 2. Open the cover. 3. Release the catridge and then put them on again. 4. Close The Cover... 5. Turn Off, then Turn On. To reset blinking lamp or waste ink counter by using General tool from this link http://www.ziddu.com/download/7737091/Software_Resetter_CanoniP1900.zip.html

You can download the driver from here. If you need this resetter,you can download from here. or from www.indoreset.blogspot.com Thanks to Orthotomine and Serkan for cracking them...

CANON MP190 Reset Waste Ink 1) Enter SERVICE MODE.By pressing Menu, Copy, Scan, Copy, Copy 2) Select TEST MODE. 3) Select [8] PRINTER TEST in TEST MODE. 4) Select 3. [EEPROM CLEAR]. 5) Select 0. [INK COUNT]. 6) Press the [Set] key. 7) Press the [Stop/Reset] key (returning to the state of 3), and then press the [ON/OFF] key. CANON MP145 With the printer powered off but connected to a power source , you must: A.Press stop/reset button, and then press [ON/OFF] button to restart B.Press [ON/OFF] again and then press twice the stop/reset button. C.Press [ON/OFF] & Stop/reset button together, this time to enter the repair status and power lights will be green. D.Press stop/reset button 4x and warning lights will be go out in [ON/OFF]button. E.Turn off the printer.( it must be turn off) and then turn it on again. Use with your own risk , i'll try this way and my Pixma MP145 not blink again. Read more after jump CANON MP150 1) With the printer powered off but connected to a power sourc...