Resetter Canon MP190/MP145/MP150/MP160

CANON MP190
Reset Waste Ink
1) Enter SERVICE MODE.By pressing Menu, Copy, Scan, Copy, Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3), and then press the [ON/OFF] key.

CANON MP145
With the printer powered off but connected to a power source , you must:
A.Press stop/reset button, and then press [ON/OFF] button to restart
B.Press [ON/OFF] again and then press twice the stop/reset button.
C.Press [ON/OFF] & Stop/reset button together, this time to enter the repair status and power lights will be green.
D.Press stop/reset button 4x and warning lights will be go out in [ON/OFF]button.
E.Turn off the printer.( it must be turn off) and then turn it on again.

Use with your own risk , i'll try this way and my Pixma MP145 not blink again.
Read more after jump

CANON MP150
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to thefunction listed in the table below.
(Each time the Stop/Reset button is pressed, the LED lights alternately inorange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM
4 times Green Waste ink counter reset
5 Turn off the printer.( it must be turn off)and then turn it on again.

CANON PIXMA MP160
1) With the printer off, but connected, press the On / Off button, while the Stop button / Reset. (The triangle inside the circle).
2) When the light of On / Off switch is (green), and press the release button Stop / Reset twicewhile held down the On / Off button (Power).
3) Release the buttons On / Off and Stop / Reset (regardless of order), Wait for the menu is ready
4) When the light of On / Off this green, press the Stop / Reset 4 times
5) Turn off the printer (press three times On / Off)
6) Enjoy it ...

Comments

Anonymous said…
gak ada tombol MENU di printer Canon Pixma MP190, tolol!
goblog luh, udah nyontek, salah lagi.

Popular posts from this blog

Julie Bowen Crush

Tips How to Create 5 Backlinks for Blogger

Reset Counter Canon Ip2770